Default Fox Fitting - options for ZEBm Recon, DVO and Ohlins
Mudhugger have had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38’s and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2.
MINIMUM FORK OFFSET - 44MM
Also compatible with Ohlins RXF and DH forks (adapter bracket required).
Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold seperately) see link above.
PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the seperate adapter for Ohlins DH forks.
- Length - 390mm total - Rear extension 255mm, front extension 105mm
- Weight - 100g, without fittings.
Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. For ZEB, new Domain, Recon, DVO and Ohlins an ADAPTER PACK is required, sold seperatley.
- Shorty version of the LONG EVO
- More mud clearance
- No more crown fouling at full compression
- Stiffer
- Subtle kicker to keep length as short as possible without compromising spray protection
- 100% recycled PP
- Designed, made and packed in the UK